Huawei MRD-LX3 User Manual

Dual Card Dual Standby Single
Pass (dual-SIM devices only)
Your device supports only dual card dual standby single pass,
which means you cannot use both SIM cards for calls or data
services simultaneously.
l When you are on a call using SIM card 1, SIM card 2 cannot
be used to make or answer calls. If someone calls SIM card
2, the caller will hear a voice message similar to "The
subscriber you dialed is out of the service area" or "The
subscriber you dialed cannot be connected for the moment,
please try again later." The actual message will vary by
service provider.
l When you are using SIM card 1's data service, SIM card 2's
data service will be disabled.
Your device's single pass feature helps reduce power
consumption and increase your device's standby time. It is not
related to your service provider's network conditions.
l You can enable call forwarding between SIMs on the
device to avoid missed calls.
3

Huawei MRD-LX3 Specifications

General

Model	Huawei MRD-LX3
Category	Cell Phone
Display Type	IPS LCD
Processor	Mediatek MT6761 Helio A22
RAM	2 GB
Internal Storage	32 GB
Battery	3020 mAh
SIM	Dual SIM (Nano-SIM, dual stand-by)
Network	GSM / HSPA / LTE
Bluetooth	4.2, A2DP, LE
Expandable Storage	microSDXC
Main Camera	13 MP, f/1.8, PDAF
Front Camera	5 MP
Operating System	Android 9.0 (Pie), EMUI 9