Using Wi-Fi Direct to send and receive files
Share files between two devices by establishing a Wi-Fi Direct connection.
This feature requires a Wi-Fi connection. Ensure that Wi-Fi is enabled on both devices.
1 Open Gallery and select the picture you want to send.
2 Touch Share > Wi-Fi Direct. Wait until the receiving device is detected, then select it.
If the receiving device is not detected, check that Wi-Fi is enabled.
3 A prompt will be displayed on the receiving device. Touch Accept to accept the file transfer
request.
Open the notification panel and touch Notifications to monitor the file transfer progress.
By default, received files are saved to the Wi-Fi Direct folder on your phone's internal
storage.
NFC and payment
Use NFC to share data rapidly between two phones. If your carrier supports NFC payments, you
can use an NFC-enabled SIM card to make payments. Contact your carrier for more information.
This feature is only available on NFC-enabled phones.
Enabling NFC
1 Open
Settings.
2 Touch More > NFC.
3 Turn on the NFC switch to enable NFC.
4 Turn on the Huawei Beam switch to enable Huawei Beam.
Using NFC to share web pages or contacts
You can use NFC to share data rapidly between two phones. To share photos, videos and web
pages, simply place the two phones back to back.
Accessing the Internet
68
To Next Page
Loading...
