5b
Pressing the power button on either controller
5d
Checking status indicators on the enclosures
After you have powered on a disk enclosure or the controller enclosure, check that all disks are
working correctly (no alarm/location indicator is steady red).
Power indicator of the controller
enclosure: steady green
Disk alarm/location
indicator: off
Controller enclosure
front view
Controller enclosure
Scenario 1 Turn on the switches of the power
distribution box
Scenario 2 Turn on the switch of the PDU
Front
Front
Rear
Rear
25
Pressing the power button on either engine node
5c
File engine
NOTICE
To Next Page
Loading...
Need help?
General