Huawei OptiXstar B650G-8E8P3W - Indicator Description; System and Network Indicators

5 Description of Indicator
Indicator Status Description
POWER Steady
green
Indicates that the power is on and working properly.
O Indicates that the power is o or faulty.
LOS Red
blinkin
g
Indicates that the received optical power is lower than
the sensitivity of the optical receiver
O Indicates that the received optical power is normal.
PON Steady
green
Indicates that the device has been activated.
Green
blinkin
g
Indicates that the device is activating.
O Indicates that the device is not activated.
SYS Steady
red
Indicates the device system failure.
Red
blinkin
g
Indicates that the system is too busy (CPU/memory
utilization is exceeded).
Steady
green
Indicates that the system is normal, the connection is
congured and the IP address is obtained.
Green
blinkin
g
Indicates that the system is normal, the connection is
congured but the IP address is not obtained.
O Indicates that no network connection is congured.
VPN Steady
green
Indicates that the VPN connection has been
established but no data is being transmitted.
OptiXstar B650G-8E8P3W
Quick Start 01 5 Description of Indicator
Issue 01 (2022-04-07) Copyright © Huawei Technologies Co., Ltd. 15