To adjust focus and metering separately, touch and hold the viewnder and drag the
respective frame or ring to the desired location.
• Adjust brightness: Touch the viewnder. When the symbol appears next to the
focus frame, drag it up or down.
• Zoom in or out: On the viewnder, pinch in or out, or drag the zoom slider.
• Select a camera mode: Swipe up, down, left, or right across the camera mode options.
• Turn the ash on or o: Touch and select (Auto), (On), (O), or
(Always on).
These features may not be available in some camera modes.
3 Touch to take a photo.
Take Burst Photos
Use Burst mode to take a sequence of photos in quick succession so you can choose the best
one.
Burst shooting is only available when using the rear camera.
1 Open
Camera and select Photo mode.
2 Touch and hold
or press and hold one of the Volume buttons to take a burst photo.
When shooting, you'll see a counter, which indicates how many photos you've taken so
far.
3 Lift your nger to stop shooting.
Once you have nished, select photos you want to keep from the burst.
1 Open
Gallery.
2 Touch a burst photo (which will be tagged with
), then touch .
3 Swipe through the burst photos, select the ones you want to keep, then touch and
follow the onscreen instructions.
4 To delete the whole burst photo, touch and hold to select the photo, then touch .
Take Timed Photos
The camera timer allows you to set a time delay so you can get into position after you have
touched the shutter button.
1 Open
Camera.
2 Go to
> Timer and select a delay option.
Camera and Gallery
57
To Next Page
Loading...
