Huawei P50 Pocket - Take Panoramic Photos; Monochrome Photography

Automatically Switch to Super Macro Mode
1 Open Camera. When the camera is close enough to the object you want to shoot, it will
automatically focus on the object. If
is enabled, the screen will display Super macro.
If it is not displayed, keep a distance of 2.5–10.0 cm (about 1–4 in.) away from the
subject.
2 Touch to take a photo.
Take Panoramic Photos
Take Panoramic Photos
Add some width to your landscape or group photos with the Panorama feature. The camera
takes multiple photos of objects within your
eld of view and stitches them together into a
single panoramic photo.
Use the Rear Camera to Take Panoramic Photos
Panorama mode combines multiple shots into a seamless panoramic photo. Simply move the
camera as you shoot and the camera will take care of the rest.
1 Go to Camera > More and select Panorama mode.
2 Touch and set the pan direction.
3 Point the camera at your starting point, then touch
to start shooting. Move the
camera in the direction of the arrow displayed on the screen. Keep the arrow on the
center line when you are taking the photo.
4 Touch when you are nished.
Use the Front Camera to Take Panoramic Seles
1 In Panorama mode, touch to switch to the front camera.
Touch and drag the slider to adjust the beauty eect. A larger value will produce a
more pronounced beauty eect.
2 Point the camera at the center of your shot, then touch to take the rst photo.
3 Turn the camera to the left and right slowly as instructed. When the two frames on the
viewnder overlap, the camera will automatically take the second and last photos.
After the three photos are taken, the camera will automatically combine them into a
panoramic photo.
Monochrome Photography
Camera and Gallery
71