Huawei PI-DC A11 User Manual

OptiX RTN PI-DC A11
Product Overview and Installation Guide
Issue: 04
Date: 2018-10-30
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved.
01
Safety Precautions
• Always hold an insulated part of the P&E cable. Never touch the RJ45 connector.
• Do not touch the pins inside the P&E port on the PI with your hands or a conductor.
• Be sure to connect the power cables of the PI correctly to the positive and negative terminals of the power supply
device .To prevent damage to power cables or devices caused by short-circuits, install a circuit breaker on the
negative terminal of the power supply device.
• Do not install or remove a live P&E cable.
HUAWEI TECHNOLOGIES CO., LTD .

Huawei PI-DC A11 Specifications

General

Brand	Huawei
Model	PI-DC A11
Category	Laboratory Equipment
Language	English

Summary

Safety Precautions

Electrical Safety and Handling

Key safety instructions for handling the PI, including P&E cable and connector precautions.

Product Overview

Appearance and Port Descriptions

Details the PI's physical appearance, ports, and indicator status.

Principles and Application Scenarios

Explains the PI's working principles and its application scenarios with different devices.

Technical Specifications

Covers power supply, dimensions, weight, compliance, and environmental deployment.

Installation Guide

Terminating DC Power Cable Connector

Step-by-step guide for preparing and connecting a DC power cable with a connector.

Cabinet Installation Procedures

Instructions for installing the PI in 19-inch and ETSI cabinets.

Wall and Outdoor Cabinet Mounting

Procedures for mounting the PI on a wall or in an outdoor cabinet.

Cable Connections and Powering On

Guidance on connecting P&E cables, power cables, and powering on the device.