Huawei Quidway S5000 Series User Manual

Operation Manual - Getting Started
Quidway S5000 Series Ethernet Switches Chapter 3 Command Line Interface
3-5
z Partial help
You can get the help information through these online help commands, which are
described as follows.
1) Input “?” in any view to get all the commands in it and corresponding descriptions.
<Quidway> ?
User view commands:
language-mode Specify the language environment
ping Ping function
quit Exit from current command view
super Privilege specified user priority level
telnet Establish one TELNET connection
tracert Trace route function
2) Input a command with a “?” separated by a space. If this position is for keywords,
all the keywords and the corresponding brief descriptions will be listed.
<Quidway> language-mode ?
chinese Chinese environment
english English environment
3) Input a command with a “?” separated by a space. If this position is for parameters,
all the parameters and their brief descriptions will be listed.
[Quidway] garp timer leaveall ?
INTEGER<65-32765> Value of timer in centiseconds
(LeaveAllTime > (LeaveTime [On all ports]))
Time must be multiple of 5 centiseconds
[Quidway] garp timer leaveall 300 ?
<cr>
<cr> indicates no parameter in this position. The next command line repeats the
command, you can press <Enter> to execute it directly.
4) Input a character string with a “?”, then all the commands with this character string
as their initials will be listed.
<Quidway>p?
ping
5) Input a command with a character string and “?”, then all the key words with this
character string as their initials in the command will be listed.
<Quidway> display ver?
version
6) Input the first letters of a keyword of a command and press <Tab> key. If no other
keywords are headed by this letters, then this unique keyword will be displayed
automatically.

Huawei Quidway S5000 Series Specifications

General

Brand	Huawei
Model	Quidway S5000 Series
Category	Switch
Language	English