Item
S5700-10P-
LI-AC
S5700-10P-
PWR-LI-AC
S5700-28P-LI
S5700-28P-PWR-LI
S5700-28X-LI
S5700-28X-PWR-LI-AC
S5700-28X-LI-24S
S5701-28X-LI-AC
S5701-28X-LI-24S-AC
S5700-52P-LI
S5700-52P-
PWR-LI
S5700-52X-LI*
S5700-52X-
PWR-LI-AC
S5700-28P-LI-BAT
S5700-28P-LI-4AH
S5700-28P-LI-24S-
BAT
S5700-28P-LI-24S-
4AH
S5700-
52X-LI-
48CS-AC
Fixed ports
S5700-10P-LI-AC/S5700-10P-PWR-LI-AC:
8 10/100/1000Base-T Ethernet ports, 2 GE SFP ports
S5
700-28P-LI*/S5700-28P-PWR-LI/ S5700-28P-LI-BAT/S5700-28P-LI-4AH:
24 10/100/1000Base-T Ethernet ports, 4 GE SFP ports
S5700-52P-LI*/S5700-52P-PWR-LI:
48 10/100/1000Base-T Ethernet ports, 4 GE SFP ports
S5700-28X-LI*/S5700-28X-PWR-LI-AC/ S5701-28X-LI-AC:
24 10/100/1000Base-T Ethernet ports, 4 10GE SFP+ ports
S5700-52X-LI*/S5700-52X-PWR-LI-AC:
48 10/100/1000Base-T Ethernet ports, 4 10GE SFP+ ports
S5700-28X-
LI-24S/ S5701-28X-LI-24S-AC:
24 GE SFP ports, 4 Combo 10/100/1000Base-T Ethernet ports, 4 10GE SFP+ ports
S5700-28P-LI-24S-BAT S5700-28P-LI-24S-4AH:
28 GE SFP ports, 4 Combo 10/100/1000Base-T Ethernet ports
S5700-52X-LI-48CS-AC:
48 GE CSFP ports or 24 GE SFP ports, four Combo 10/100/1000Base-T Ethernet ports, four
10GE SFP+ ports
Product Specifications
Compared with switches using external power supply units, the S5700-LI-BAT occupies less space and –
is easier to install.
Intelligent power management, long standby time –
Battery LAN switches on the entire network can be managed centrally using a web system, facilitating –
network operation and maintenance. As the battery lifetime is predictable, you do not need to replace
bat
teries periodically, reducing hardware costs.
The internal battery provides alarm and voltage/current protection functions as well as overtemperature –
protection, which enhance reliability.
CSFP providing high-density access and increased bandwidth
CSFP switches support downlink CSFP ports. Each downlink CSFP port equipped with a CSFP GE optical •
module and one pair of fibers can provide 2 Gbit/s ba
ndwidth bidirectionally, which is two times
the bandwidth of standard SFP optical modules. The 24 downlink CSFP ports can provide 48 Gbit/s
bandwidth bidirectionally, implementing high-density access (equal to access of 48 standard SFP ports)
and saving the cost of deploying fibers and adding optical modules.
Easy O&M with front panel
The models with front power sockets can be installed in a 300 mm deep cabinet, and can be maintained •
through the front panel. This simplifies operation and maintenance. The cabinets can be placed against
the wall or back to back, and is well-suited for shallow cabinets and limited equipment room space.
To Next Page
Loading...
