Huawei S5700 Series - Page 42

Display Mode Status Description
Blinking green The device is a command switch:
l If the indicator of an interface
blinks, the number of this
interface is the stack ID of the
device.
l If the first nine interface
indicators of the device blink,
the stack ID of the device is 0.
Figure 2-10 S5700-28P-PWR-LI-AC indicators
1
2
4
3
56
7
8
8
9
10
Table 2-17 Description of S5700-28P-PWR-LI-AC indicators
No.
Indicator Identifier Status Description
1 Power
indicator
PWR Off The switch is
powered off.
Green The switch is
powered on.
Orange The power supply
unit is faulty, and the
external RPS system
has started.
2 System status
indicator
SYS Off The system is not
operating.
Blinking green
quickly (4 Hz)
The system is starting.
Blinking green
slowly (0.5 Hz)
The system is
operating properly.
Blinking orange
(0.5 Hz)
The system is
sleeping.
S3700&S5700&S6700 Series Ethernet Switches
Quick Start 2 Product Hardware Introduction
Issue 02 (2012-09-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
37