Huawei SUN2000-110KTL-M0 User Manual

Figure 8-3 Removing the bae of the air intake vent
NO TICE
After the cleaning is complete, reinstall the bae plate. Tighten the screws with a
torque of 1.2 N·m.
8.4 Troubleshooting
Alarm severities are dened as follows:
● Major: The solar inverter is faulty. As a result, the output power decreases or
the grid-tied power generation is stopped.
● Minor: Some components are faulty without
aecting the grid-tied power
generation.
● Warning: The solar inverter works properly. The output power decreases or
some authorization functions fail due to external factors.
SUN2000-(75KTL, 100KTL, 110KTL, 125KTL) Series
User Manual 8 Maintenance
Issue 11 (2021-11-10) Copyright © Huawei Technologies Co., Ltd. 110

Huawei SUN2000-110KTL-M0 Specifications

General

Model	SUN2000-110KTL-M0
Type	String Inverter
Rated Output Power	110 kW
Max. DC Power	132 kW
Max. Input Power	132 kW
Max. DC Voltage	1100 V
Max. Input Voltage	1100 V
Start Voltage	200 V
Nominal Output Voltage	400 V
Rated AC Voltage	400 V
Output Frequency	50 Hz / 60 Hz
Rated AC Grid Frequency	50 Hz / 60 Hz
Total Harmonic Distortion (THD)	< 3%
Efficiency	98.6%
Max. Efficiency	98.8%
European Weighted Efficiency	98.5%
Protection Level	IP65
Protection Degree	IP65
Max. Input Current per MPPT	20 A
Power Factor Adjustment Range	0.8 leading ... 0.8 lagging
Operating Temperature	-25 °C to +60 °C
Operating Temperature Range	-25°C ~ +60°C
Number of MPPTs	6
Number of MPPT Trackers	6