Huawei SUN2000-110KTL-M0 - Page 95

Figure 7-14 Grid parameters
Table 7-5 Grid parameters
Parameter
Description
Grid code Set this parameter based on the grid code of the country or
region where the SUN2000 is used and the SUN2000
application scenario.
Isolation settings Species the working mode of the SUN2000 according to the
grounding status at the DC side and the connection status to
the grid.
Output mode Species whether the inverter output has a neutral wire based
on the application scenario.
Automatically start upon grid
recovery
Species whether to allow the SUN2000 to automatically start
after the power grid recovers.
Grid connected recovery time
from grid faults (s)
Species the waiting time for SUN2000 restart after the power
grid recovers.
SUN2000-(100KTL, 110KTL, 125KTL) Series
User Manual 7 Man-Machine Interactions
Issue 07 (2020-09-15) Copyright © Huawei Technologies Co., Ltd. 87