Huawei SUN2000-15KTL-M5 User Manual (English)

Other manuals for Huawei SUN2000-15KTL-M5

Questions and Answers:

J
John RiosAug 30, 2025
Why is my Huawei SUN2000-15KTL-M5 Inverter showing an output overcurrent error?
- J
  Jessica MontgomeryAug 30, 2025
  An output overcurrent error on your Huawei Inverter indicates that the grid voltage has dropped dramatically or the grid is short-circuited, causing the inverter's output current to exceed the limit. The inverter will monitor conditions and try to recover automatically. If the alarm persists and affects energy yield, check for a short circuit in the output. If you can't fix it, contact your dealer or Huawei technical support.
N
natalie71Sep 6, 2025
What does abnormal active power scheduling instruction mean on a Huawei SUN2000-15KTL-M5 Inverter?
- C
  chad36Sep 6, 2025
  If your Huawei Inverter displays an abnormal active power scheduling instruction, it means the DI input is abnormal or inconsistent with the configuration. Check whether the cables are correctly connected to the DI ports. On the DI active scheduling screen under the dry contact scheduling settings, view the DI signal configuration mapping table. Contact the power grid company to check whether the configurations in the mapping table are complete and meet the requirements.
C
Casey BuckleyAug 29, 2025
What to do if Huawei SUN2000-15KTL-M5 shows AFCI self-check failure?
- J
  Jackson ManningAug 29, 2025
  If your Huawei Inverter shows an AFCI self-check failure, turn off both the AC output switch and the DC input switch. Wait for 5 minutes, then turn them back on. If the alarm continues, contact Huawei technical support.
J
Jason StoutSep 8, 2025
Why is my Huawei SUN2000-15KTL-M5 Inverter showing Grid Undervoltage?
- V
  Victoria RiveraSep 8, 2025
  If your Huawei Inverter displays a 'Grid Undervoltage' error, it means the power grid voltage is too low. Here’s what to do: 1. If the alarm is occasional, it could be a temporary issue with the power grid, and the inverter should recover automatically. 2. If the alarm persists, verify that the power grid voltage is within the acceptable range. If not, contact your local power operator. If the voltage is within range, you might need to adjust the grid undervoltage protection threshold via the app, SmartLogger, or NMS, but only with the consent of the local power operator. 3. If the alarm continues for a long time, inspect the AC circuit breaker and the AC output power cable.
J
Jason BakerSep 7, 2025
Why does my Huawei SUN2000-15KTL-M5 Inverter display Grid Overvoltage?
- R
  Randy SandersSep 8, 2025
  If your Huawei Inverter is showing a 'Grid Overvoltage' alarm, it could be due to the power grid voltage exceeding acceptable limits. Here's what to do: 1. If the alarm is occasional, it might be a temporary grid issue; the inverter should recover automatically. 2. If the problem persists, check if the grid voltage is within the normal range. If it's not, contact your local power operator. If it is, you might need to adjust the grid overvoltage protection threshold using the app, SmartLogger, or NMS, but only with the power operator's consent. 3. If the alarm continues long-term, check the peak voltage of the grid and contact the power operator if needed.
M
Ms. Sydney HardySep 12, 2025
How to resolve String Reverse Connection on Huawei SUN2000-15KTL-M5?
- B
  Brandy AcostaSep 12, 2025
  If your Huawei Inverter is showing a 'String Reverse Connection' error, it means the polarity of the PV string is reversed. To fix this, wait until night when solar irradiance is low and the PV string current drops below 0.5 A. Then, turn off the DC switch and correct the PV string connection.
C
Christian SullivanAug 27, 2025
Why is my Huawei Inverter showing abnormal grounding?
- C
  Carrie BennettAug 27, 2025
  An abnormal grounding error on your Huawei Inverter indicates that the neutral wire or PE cable isn't connected, or the output mode is set incorrectly. To fix this, power off the inverter first (turn off the AC and DC switches and wait). Then: 1. Check the PE cable connection. 2. If connected to a TN grid, check the neutral wire connection and voltage to ground. 3. After powering on, ensure the inverter's output mode matches the cable connection mode.
O
ortegatiffanyAug 26, 2025
What to do if Huawei SUN2000-15KTL-M5 displays DC arc fault?
- M
  michael98Aug 27, 2025
  A DC arc fault on your Huawei Inverter means the PV string power cables are arcing or have poor contact. Check the PV string cables to ensure they are not arcing and are properly connected.
T
Travis CooperAug 26, 2025
What causes grid undervoltage on Huawei Inverter?
- J
  Jacob SmithAug 26, 2025
  A grid undervoltage error on your Huawei Inverter means the power grid voltage is too low, or the low voltage duration exceeds the LVRT specified value. Here's how to handle it: 1. If it's occasional, it might be a temporary grid issue; the inverter should recover automatically. 2. If it persists, check if the grid voltage is within range and contact the local power operator if it's not. If it is, you can modify the grid undervoltage protection threshold via the app, SmartLogger, or NMS, with the power operator's consent. 3. If it continues, inspect the AC circuit breaker and AC output power cable.
P
Pamela BrownAug 25, 2025
How to resolve high string input voltage on a Huawei SUN2000-15KTL-M5?
- J
  Justin ParkerAug 26, 2025
  A high string input voltage error on your Huawei Inverter means the PV array isn't properly configured, with too many PV modules connected in series, causing the PV string open-circuit voltage to exceed the inverter's maximum operating voltage. Reduce the number of PV modules connected in series until the PV string open-circuit voltage is at or below the inverter's maximum. The alarm should then disappear.

Huawei SUN2000-15KTL-M5 Specifications

General

Model	SUN2000-15KTL-M5
Max. DC Voltage	1100 V
Input Voltage Range	200 V - 1000 V
Start Voltage	200 V
Number of MPP Trackers	2
Max. Input Current per MPPT	26 A
Rated AC Frequency	50 Hz / 60 Hz
Max. Total Harmonic Distortion	< 3%
Max Efficiency	98.6%
MPPT Efficiency	99.9%
Protection Degree	IP65
DC Connection	MC4
Rated Output Power	15000 W
Max. DC Power	22.5 kW
Rated AC Voltage	400 V
Adjustable Power Factor Range	0.8 leading to 0.8 lagging
Operating Temperature Range	-25 °C to +60 °C
Cooling Method	Natural cooling
AC Connection	Terminal
Communication	RS485
Max. Output Power	16500 W