Huawei SUN2000-15KTL-M5 User Manual (English)

Other manuals for Huawei SUN2000-15KTL-M5

Questions and Answers:

T
Travis CooperAug 26, 2025
What causes grid undervoltage on Huawei Inverter?
- J
  Jacob SmithAug 26, 2025
  A grid undervoltage error on your Huawei Inverter means the power grid voltage is too low, or the low voltage duration exceeds the LVRT specified value. Here's how to handle it: 1. If it's occasional, it might be a temporary grid issue; the inverter should recover automatically. 2. If it persists, check if the grid voltage is within range and contact the local power operator if it's not. If it is, you can modify the grid undervoltage protection threshold via the app, SmartLogger, or NMS, with the power operator's consent. 3. If it continues, inspect the AC circuit breaker and AC output power cable.
O
ortegatiffanyAug 26, 2025
What to do if Huawei SUN2000-15KTL-M5 displays DC arc fault?
- M
  michael98Aug 27, 2025
  A DC arc fault on your Huawei Inverter means the PV string power cables are arcing or have poor contact. Check the PV string cables to ensure they are not arcing and are properly connected.
C
Christian SullivanAug 27, 2025
Why is my Huawei Inverter showing abnormal grounding?
- C
  Carrie BennettAug 27, 2025
  An abnormal grounding error on your Huawei Inverter indicates that the neutral wire or PE cable isn't connected, or the output mode is set incorrectly. To fix this, power off the inverter first (turn off the AC and DC switches and wait). Then: 1. Check the PE cable connection. 2. If connected to a TN grid, check the neutral wire connection and voltage to ground. 3. After powering on, ensure the inverter's output mode matches the cable connection mode.
Z
Zachary CookAug 27, 2025
What to do if Huawei SUN2000-15KTL-M5 Inverter displays string reverse connection?
- T
  terrywilliamAug 27, 2025
  A string reverse connection error on your Huawei Inverter indicates that the PV string polarity is reversed. Wait until night when solar irradiance is low and the PV string current drops below 0.5 A. Then, turn off the DC switch and correct the PV string connection.
T
toddwoodAug 27, 2025
Why is my Huawei Inverter cabinet overheating?
- M
  mtaylorAug 28, 2025
  Cabinet overheating on your Huawei Inverter means it's either installed in a poorly ventilated area, the ambient temperature is too high, or the inverter isn't working correctly. First, check the ventilation and ambient temperature where the inverter is installed. If ventilation is poor or the temperature is too high, improve ventilation and heat dissipation. If both are fine and the alarm persists, contact your dealer or Huawei technical support.
F
Felicia HarrisonAug 28, 2025
What does grid overfrequency mean on my Huawei SUN2000-15KTL-M5?
- M
  Mark SmithAug 28, 2025
  A grid overfrequency alarm on your Huawei Inverter means the power grid frequency is too high, exceeding local power grid code requirements. If the alarm is occasional, it may be a temporary grid issue, and the inverter should recover automatically. If it persists, check if the grid frequency is within the acceptable range and contact the local power operator if it isn't. If the frequency is normal, you can modify the grid overfrequency protection threshold using the app, SmartLogger, or NMS, with the local power operator's consent.
J
Jason BernardAug 25, 2025
What to do if Huawei Inverter shows grid loss?
- D
  Daniel JohnsonAug 25, 2025
  If your Huawei Inverter displays a grid loss error, it means the power grid is down, the AC circuit is disconnected, or the AC switch is off. The alarm should clear automatically once the power grid recovers. You should also check if the AC circuit is disconnected or the AC switch is turned off.
F
fchangAug 29, 2025
What does it mean when my Huawei SUN2000-15KTL-M5 Inverter displays grid underfrequency?
- G
  George DurhamAug 29, 2025
  A grid underfrequency alarm on your Huawei Inverter indicates that the power grid frequency is lower than the local power grid code requirements. If the alarm occurs occasionally, it might be due to a temporary grid issue, and the inverter should recover automatically. If the alarm persists, verify that the power grid frequency is within the acceptable range. If it is not, contact the local power operator. If the frequency is within range, you can modify the grid underfrequency protection threshold through the app, SmartLogger, or NMS with the consent of the local power operator.
J
John RiosAug 30, 2025
Why is my Huawei SUN2000-15KTL-M5 Inverter showing an output overcurrent error?
- J
  Jessica MontgomeryAug 30, 2025
  An output overcurrent error on your Huawei Inverter indicates that the grid voltage has dropped dramatically or the grid is short-circuited, causing the inverter's output current to exceed the limit. The inverter will monitor conditions and try to recover automatically. If the alarm persists and affects energy yield, check for a short circuit in the output. If you can't fix it, contact your dealer or Huawei technical support.
E
Erica AlvarezAug 30, 2025
What does grid voltage imbalance mean on a Huawei SUN2000-15KTL-M5 Inverter?
- C
  Cheryl DavisAug 30, 2025
  A grid voltage imbalance alarm on your Huawei Inverter means the difference between power grid phase voltages is too high. If the alarm is occasional, it may be a temporary grid issue, and the inverter should recover automatically. If it persists, check if the grid voltage is within the acceptable range and contact the local power operator if it isn't. If the alarm lasts for a long time, check the AC output power cable connection. If the cable is correctly connected, but the alarm persists and impacts energy yield, contact the local power operator.

Huawei SUN2000-15KTL-M5 Specifications

General

Model	SUN2000-15KTL-M5
Max. DC Voltage	1100 V
Input Voltage Range	200 V - 1000 V
Start Voltage	200 V
Number of MPP Trackers	2
Max. Input Current per MPPT	26 A
Rated AC Frequency	50 Hz / 60 Hz
Max. Total Harmonic Distortion	< 3%
Max Efficiency	98.6%
MPPT Efficiency	99.9%
Protection Degree	IP65
DC Connection	MC4
Rated Output Power	15000 W
Max. DC Power	22.5 kW
Rated AC Voltage	400 V
Adjustable Power Factor Range	0.8 leading to 0.8 lagging
Operating Temperature Range	-25 °C to +60 °C
Cooling Method	Natural cooling
AC Connection	Terminal
Communication	RS485
Max. Output Power	16500 W