Huawei SUN2000-17KTL - Page 48

47
Classification
Status (Blinking Slowly: On for 1s
and Off for 1s; Blinking Fast: On for
0.2s and Off for 0.2s)
Description
Running
indication
–
Steady green
Steady green
The SUN2000 is operating in grid
-
tied mode.
Blinking green
slowly
Off
The DC is on and the AC is off.
Blinking green
slowly
Blinking green
slowly
Both the DC and AC are on, and the
SUN2000 is not supplying power to
the power grid.
Off
Blinking green
slowly
The DC is off and the AC is on.
Off
Off
Both the DC and AC are off.
Blinking red fast
–
DC environmental alarm
–
Blinking red fast
AC environmental alarm
Steady red
Steady red
Faulty
Communications
indicator
–
Blinking green fast
Communication is in progress.
Blinking green slowly
Mobile phone access
Off
No communication
Note: If LED1, LED2, and LED3 are steady red, the SUN2000 is faulty and needs to be replaced.
Before turning on the AC switch between the SUN2000 and the power grid, check that the AC
voltage is within the specified range using a multimeter.
9
Powering On the System
1. Turn on the AC switch between the SUN2000 and the power grid.
2. (Optional) Remove the locking screw beside the DC switch. Store the screws properly for
future power-off maintenance.
3. Turn on the DC switch at the bottom of the SUN2000.
4. Observe the LED indicators to check the operating status of the SUN2000.