4.2.3 Angle Requirements
The SUN2000 can be installed on a support. The installation angle requirements
are as follows:
● Install the SUN2000 vertically or at a maximum back tilt of 75 degrees to
facilitate heat dissipation.
● Do not install the SUN2000 at forward tilted, excessive back tilted, side tilted,
horizontal, or upside down positions.
Figure 4-10 Installation angle
4.3 Preparing Tools
Table 4-2 Personal protective equipment (PPE)
Safety helmet Goggles Protective shoes Reective vest
Insulated gloves Protective gloves Dust mask Insulated shoes
SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series
User Manual 4 Installation
Issue 07 (2023-06-30) Copyright © Huawei Technologies Co., Ltd. 33
To Next Page
Loading...
