Huawei SUN2000-28KTL Quick Guide

2
3. Remove the DC connectors and use a cable cutter to cut off the terminals of DC input power
cables. Set the cables aside for future use.
Cable
cutter
Cable
cutter
The DC terminals of SUN2000-(8KTL–12KTL) must be cut off. If the DC connectors of SUN2000-
(8KTL–12KTL) are directly connected to SUN2000-(8KTL–12KTL)-M2, the SUN2000 may be
burnt.
4. Remove the RS485 communications cable and use a cable cutter to cut off the RJ45
connector. Set the cable aside for future use.
5. Remove the PE cable and remove the crimped OT terminal. Set the cable aside for future use.

Huawei SUN2000-28KTL Specifications

General

Brand	Huawei
Model	SUN2000-28KTL
Category	Inverter
Language	English