Huawei SUN2000-2KTL-L0 - Page 41

SUN2000-(2KTL-5KTL)-L0
User Manual
4 System Installation
Issue 02 (2019-07-04)
Copyright © Huawei Technologies Co., Ltd.
35
Procedure
Step 1 Press the buckle inwards to remove the 4G Smart Dongle enclosure, and then install the SIM
card.
Figure 4-21 Installing a SIM card

When installing a SIM card, you can determine the SIM card installation direction based on the
arrow mark on the slot.

When being pressed into place, the SIM card will be locked, which means that the card is installed
correctly.

To remove the SIM card, push it inwards. Then the SIM card springs out automatically.

When reinstalling the 4G Smart Dongle enclosure, ensure that the buckle springs back to the original
position.
Step 2 Remove the watertight cap from the USB-4G port and fix the 4G Smart Dongle.
Figure 4-22 Fixing a 4G Smart Dongle
----End