21
Making a DC call from the Call Log
Select Menu > Call log or press
in standby mode, and then
select DC calls to select the desired number from the DC calls log.
Then push
to start the DC call.
Alternatively, if you have selected Menu > Settings > Call > DC
settings > One touch DC > Call log, push
to select the
required number from Call log and then push and hold
to start
the DC call.
Alert
Alerts enable you to notify someone that you want to
communicate with them using DC. When the other party receives
an Alert, the phone of the other party receives an Alert tone and
displays your name or DC number on their screen.
To send an Alert:
1.
Select Menu > Contacts or Menu > Call log > DC calls. Then
select a contact or a DC number.
2.
Press
to select Alert. Push as prompted to send an
Alert.
To Next Page
