13
User interface (UI) snapshots shown in this document correspond to V100R001C10SPC700 and
are for reference only. If
any UI changes are made, contact Huawei technical support to obtain the latest snapshots.
Symbol Description Remarks
Press A. A and B indicate the operation
symbols on the UPS control panel.
Press A and then B.
Indicates omitted screens. -
A
A B
7
Powering On and Starting the UPS
Powering On the UPS
7.1
Check that the UPS has passed all check items described in
chapter 6 "Verifying the Installation."
Switch on the external battery circuit breaker if any.
Switch on the upstream UPS mains and bypass circuit
breakers (K1, K
m
1, and K
b
1) based on site requirements.
Start the UPS in normal
or bypass mode?
No: Cold-start the UPS
using batteries.
Yes
The initialization screen is displayed.
Press
Switch on the output circuit breakers (Q, Q1, and Q2).
To Next Page
Loading...
