EasyManua.ls Logo

Huawei UPS2000-G-3KRTS - User Manual

Huawei UPS2000-G-3KRTS
87 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
UPS2000-G-(1 kVA-3 kVA)
User Manual
Issue
15
Date
2019-12-19
HUAWEI TECHNOLOGIES CO., LTD.

Table of Contents

Other manuals for Huawei UPS2000-G-3KRTS

Preview: Quick Guide
Quick Guide16 pages

Questions and Answers

  • K
    Kimberly SmithAug 12, 2025
    Why is the battery backup time shorter than expected on my Huawei UPS2000-G-3KRTS?
    • A
      Amanda HigginsAug 12, 2025
      The battery backup time may be shorter than specified due to a few reasons: * The batteries might not be fully charged. In this case, charge the batteries for at least 5 hours and then check the battery capacity. If the problem persists, contact the dealer or Huawei technical support. * The batteries could be faulty. If this is the case, contact the dealer or Huawei technical support to replace the batteries.
  • K
    kelliwintersAug 16, 2025
    What to do if the LCD is blinking and the buzzer beeps twice every second on my Huawei UPS2000-G-3KRTS UPS?
    • B
      bjacksonAug 16, 2025
      If the LCD is blinking and the buzzer beeps twice every second, it indicates that the UPS is overloaded. Here's what you should do: * Remove surplus load from the UPS output end. In some instances, the UPS might be overloaded multiple times in quick succession, causing it to lock in bypass mode. If this happens, remove the extra load, then shut down and restart the UPS.
  • R
    Rachel OconnorAug 20, 2025
    What to do if the LCD is blinking and the buzzer beeps once every second on my Huawei UPS2000-G-3KRTS?
    • M
      Monique SaundersAug 20, 2025
      If the LCD is blinking and the buzzer beeps once every second, it means that the external or internal batteries are incorrectly connected. Check that all batteries are connected correctly.
  • P
    Pamela ShawAug 23, 2025
    How to troubleshoot a Huawei UPS2000-G-3KRTS UPS when no indicator turns on and the buzzer generates no tone, despite normal main power?
    • L
      Lance LewisAug 25, 2025
      If your Huawei UPS shows no indicator lights and the buzzer is silent even with normal main power, here's what to check: * First, verify that the mains input power cable is properly connected. If it's disconnected, plug it in. * Next, ensure the mains input power cable is correctly connected to the UPS input terminal, not the output end.
  • C
    cartershaneAug 27, 2025
    What to do if my Huawei UPS beeps twice every second?
    • N
      Nicholas MartinAug 28, 2025
      If your Huawei UPS buzzer beeps twice every second, it means the UPS is overloaded. You should remove some of the load from the UPS output. In some cases, the UPS might be overloaded repeatedly, causing it to lock in bypass mode. If this happens, remove the extra load, then shut down and restart the UPS.
  • D
    Desiree MezaAug 31, 2025
    Why is the Huawei UPS2000-G-3KRTS UPS battery backup time shorter than specified?
    • T
      timothy95Aug 31, 2025
      If the battery backup time of your Huawei UPS is shorter than expected, it could be due to a couple of reasons. First, the batteries may not be fully charged. Try charging them for at least 5 hours before checking their capacity again. If the battery capacity is still not enough, or if you suspect the batteries are faulty, you should contact the dealer to replace the batteries.
  • T
    taylor79Sep 3, 2025
    How to troubleshoot a Huawei UPS with no indicator lights and no buzzer tone?
    • N
      nancy31Sep 4, 2025
      If no indicator lights up and the buzzer makes no sound on your Huawei UPS, it could be due to a disconnected mains input power cable. Ensure the input power cable is properly connected. Also, verify that the mains input power cable is correctly connected to the UPS input terminal, and not incorrectly connected to the UPS output end.
  • Y
    ybishopSep 7, 2025
    Why does my Huawei UPS buzzer beep once every second?
    • D
      Dawn JohnsonSep 8, 2025
      If the buzzer on your Huawei UPS beeps once every second, it indicates that the external or internal batteries are incorrectly connected. To resolve this, check that all batteries are connected correctly.

Summary

1 Safety Information

1.1 General Safety

Covers fundamental safety rules for operating the UPS.

1.2 Personnel Requirements

Defines who is qualified to install and operate the UPS.

1.3 Electrical Safety

Outlines safety procedures related to electrical hazards.

1.4 Installation Environment Requirements

Specifies ideal conditions for UPS installation.

1.6 Device Running Safety

Safety considerations during UPS operation.

1.7 Battery Safety

Critical safety instructions for handling UPS batteries.

2 Overview

2.2 Working Principle

Explains the internal operation of the UPS.

3 Installing the UPS

3.1 Installation Preparations

Steps and checks before UPS installation.

3.3 Securing UPS

Instructions for physically mounting the UPS unit.

3.4 Installing Cables

Guidance on connecting power and communication cables.

4 Setting Control Panel

4.1 LCD Panel

Description of the UPS front panel display.

4.4 Buttons

4.5 Setting Parameters

Guide to configuring UPS settings via the control panel.

4.6 Operating Modes

4.7 Alarm Handling

Procedures for managing UPS alarms.

8 Troubleshooting

8.1 Faults and troubleshooting measures

Guide to diagnosing and resolving UPS issues.

Huawei UPS2000-G-3KRTS Specifications

General IconGeneral
ModelUPS2000-G-3KRTS
Capacity3kVA/2.7kW
Input Voltage220/230/240 VAC
Input Frequency50/60 Hz
Input Frequency Range40-70 Hz
Output Voltage220/230/240 VAC
Output Frequency50/60 Hz
Output Power Factor0.9
WaveformPure Sine Wave
Operating Temperature0°C to 40°C
Weight25 kg
Typical Backup TimeDepends on load
Communication InterfaceRS232, USB, SNMP
Operating Humidity0% to 95% (non-condensing)
Battery TypeMaintenance-free sealed lead-acid battery

Related product manuals