Huawei UPS2000-G-3KRTS Quick Guide

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

0

HUAWEI TECHNOLOGIES CO., LTD.

UPS2000-G-(1 kVA-3 kVA)

Quick Guide

Issue: 05

Date: 2017-07-21

Table of Contents

Other manuals for Huawei UPS2000-G-3KRTS

User Manual87 pages

Questions and Answers:

K
Kimberly SmithAug 12, 2025
Why is the battery backup time shorter than expected on my Huawei UPS2000-G-3KRTS?
- A
  Amanda HigginsAug 12, 2025
  The battery backup time may be shorter than specified due to a few reasons: * The batteries might not be fully charged. In this case, charge the batteries for at least 5 hours and then check the battery capacity. If the problem persists, contact the dealer or Huawei technical support. * The batteries could be faulty. If this is the case, contact the dealer or Huawei technical support to replace the batteries.
K
kelliwintersAug 16, 2025
What to do if the LCD is blinking and the buzzer beeps twice every second on my Huawei UPS2000-G-3KRTS UPS?
- B
  bjacksonAug 16, 2025
  If the LCD is blinking and the buzzer beeps twice every second, it indicates that the UPS is overloaded. Here's what you should do: * Remove surplus load from the UPS output end. In some instances, the UPS might be overloaded multiple times in quick succession, causing it to lock in bypass mode. If this happens, remove the extra load, then shut down and restart the UPS.
R
Rachel OconnorAug 20, 2025
What to do if the LCD is blinking and the buzzer beeps once every second on my Huawei UPS2000-G-3KRTS?
- M
  Monique SaundersAug 20, 2025
  If the LCD is blinking and the buzzer beeps once every second, it means that the external or internal batteries are incorrectly connected. Check that all batteries are connected correctly.
P
Pamela ShawAug 23, 2025
How to troubleshoot a Huawei UPS2000-G-3KRTS UPS when no indicator turns on and the buzzer generates no tone, despite normal main power?
- L
  Lance LewisAug 25, 2025
  If your Huawei UPS shows no indicator lights and the buzzer is silent even with normal main power, here's what to check: * First, verify that the mains input power cable is properly connected. If it's disconnected, plug it in. * Next, ensure the mains input power cable is correctly connected to the UPS input terminal, not the output end.
C
cartershaneAug 27, 2025
What to do if my Huawei UPS beeps twice every second?
- N
  Nicholas MartinAug 28, 2025
  If your Huawei UPS buzzer beeps twice every second, it means the UPS is overloaded. You should remove some of the load from the UPS output. In some cases, the UPS might be overloaded repeatedly, causing it to lock in bypass mode. If this happens, remove the extra load, then shut down and restart the UPS.
D
Desiree MezaAug 31, 2025
Why is the Huawei UPS2000-G-3KRTS UPS battery backup time shorter than specified?
- T
  timothy95Aug 31, 2025
  If the battery backup time of your Huawei UPS is shorter than expected, it could be due to a couple of reasons. First, the batteries may not be fully charged. Try charging them for at least 5 hours before checking their capacity again. If the battery capacity is still not enough, or if you suspect the batteries are faulty, you should contact the dealer to replace the batteries.
T
taylor79Sep 3, 2025
How to troubleshoot a Huawei UPS with no indicator lights and no buzzer tone?
- N
  nancy31Sep 4, 2025
  If no indicator lights up and the buzzer makes no sound on your Huawei UPS, it could be due to a disconnected mains input power cable. Ensure the input power cable is properly connected. Also, verify that the mains input power cable is correctly connected to the UPS input terminal, and not incorrectly connected to the UPS output end.
Y
ybishopSep 7, 2025
Why does my Huawei UPS buzzer beep once every second?
- D
  Dawn JohnsonSep 8, 2025
  If the buzzer on your Huawei UPS beeps once every second, it indicates that the external or internal batteries are incorrectly connected. To resolve this, check that all batteries are connected correctly.

Huawei UPS2000-G-3KRTS Specifications

General

Model	UPS2000-G-3KRTS
Capacity	3kVA/2.7kW
Input Voltage	220/230/240 VAC
Input Frequency	50/60 Hz
Input Frequency Range	40-70 Hz
Output Voltage	220/230/240 VAC
Output Frequency	50/60 Hz
Output Power Factor	0.9
Waveform	Pure Sine Wave
Operating Temperature	0°C to 40°C
Weight	25 kg
Typical Backup Time	Depends on load
Communication Interface	RS232, USB, SNMP
Operating Humidity	0% to 95% (non-condensing)
Battery Type	Maintenance-free sealed lead-acid battery

Related product manuals

Huawei UPS2000-G-6KRTL

Preview: Huawei UPS2000-G-6 kVA

Huawei UPS2000-G-6 kVA

Huawei UPS2000-G-2KRTS

Preview: Huawei UPS2000-G-6KRTS

Huawei UPS2000-G-6KRTS

Preview: Huawei UPS2000-G-2KRTL

Huawei UPS2000-G-2KRTL

Preview: Huawei UPS2000-G-1KRTS

Huawei UPS2000-G-1KRTS

Huawei UPS2000-G-10KRTL

Preview: Huawei UPS2000-G-15KRTL

Huawei UPS2000-G-15KRTL

Huawei UPS2000-G-20KRTL

Preview: Huawei UPS2000-G Series

Huawei UPS2000-G Series

Huawei UPS2000-G-6KRTLL

Preview: Huawei UPS2000-A-1KTTS

Huawei UPS2000-A-1KTTS