Huawei UPS2000-G-6 kVA - Settings Screen

UPS2000-G-(6 kVA-20 kVA)
User Manual
B LCD Menus and Parameters
Issue 13 (2019-05-05)
Copyright © Huawei Technologies Co., Ltd.
104
Main
Menu
Second-
Level
Menu
Third-Level
Menu
Fourth-Level
Menu
Value Range
Preset Value
Subn. mask
(SNMP
Card)
N/A
0.0.0.0–255.255.255.255
255.255.255.0
Gateway
(SNMP
Card)
N/A
1.0.0.0–253.255.255.255
192.168.0.1
Communicati
on address
(Modbus
Card)
N/A
N/A
N/A
Baud rate
(Modbus
Card)
N/A
N/A
N/A
Normal
mode (Dry
contact)
N/A
Dry contact 1–6
Dry contact 1
Battery mode
(Dry contact)
N/A
Dry contact 1–6
Dry contact 2
Bypass mode
(Dry contact)
N/A
Dry contact 1–6
Dry contact 3
Batt.
undervolt
(Dry contact)
N/A
Dry contact 1–6
Dry contact 4
BPS
backfeed
(Dry contact)
N/A
Dry contact 1–6
Dry contact 5
Faulty UPS
(Dry contact)
N/A
Dry contact 1–6
Dry contact 6
System
Paramete
rs
Parallel
(configurable
after the
inverter shuts
down)
Single/Parallel
Single and Parallel
Single
Redundant
UPSs
0–3
0
Output
(configurable
after the
inverter shuts
down)
Output mode
(configurable
only on the
UPS2000-G-15
kVA/20 kVA)
Single-phase/Three-phase
Three-phase (on the
UPS2000-G-15 kVA/20
kVA)
Voltage level

220 V, 230 V, and
240 V (on the
UPS2000-G-6
kVA/10 kVA)

220 V (on the
UPS2000-G-6
kVA/10 kVA)

220 V, single-phase