Huawei UPS2000-G Series Quick Guide

8
The following screens apply to the UPS started in normal mode.
Set the language (preset: English), system parameters, and battery parameters.
Scenario 1: Initial Startup
Scenario 2: Non-initial Startup
1. Preset password: 000001. The password allows you to
enter the Settings screen.
2. Preset feature code: 999999. The password is used to
restore the password to the preset value.
If this is not the initial startup and these parameters have been set before, the system uses the
existing settings by default. Confirm the settings, as shown in the following figures.
HUAWEI
HUAWEI

Huawei UPS2000-G Series Specifications

General

Frequency	50/60 Hz
Output Power Factor	0.9
Humidity	0% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Capacity	1 kVA, 2 kVA, 3 kVA
Input Voltage	220 Vac (120 Vac/208 Vac/230 Vac/240 Vac)
Output Voltage	220/230/240 VAC
Efficiency	Up to 95%
Topology	Double conversion online
Battery Type	Sealed Lead Acid
Communication Ports	USB, RS232
Optional Communication	SNMP
Operating Temperature	0°C to 40°C