Huawei Watch D2 - Cleaning Your Device

17
temperatures, dampness, dust, salt, chemicals, or corrosive gases.
•
Avoid strong impacts, direct collisions, and exposure to sunlight or rain.
Storage and transportation conditions:
Temperature: –20°C to +55°C
Humidity: 10% RH to 95% RH (non-condensing)
Atmospheric pressure: 80 kPa to 105 kPa
Do not store the device in the following environments:
•
Environments with water, high temperatures, dampness, direct sunlight, dust, or salt.
•
Environments that can generate tilts, vibrations, or impacts.
•
Environments where chemicals are stored or corrosive gases are generated.
Store the spare strap (including the airbag) carefully when you are not using it.
Do not put the device in places that are exposed to direct sunlight, such as on a car dashboard or
on a window sill.
Keep the device away from heat and fire sources, such as electric heaters, microwave ovens,
roasters, water heaters, furnace res, candles, or other places where it may be exposed to high
temperatures.
To prevent injuries, malfunctions, or explosions, keep the device out of reach of children and pets
and make sure that they do not accidentally swallow or bite the device or its accessories.
3.2 Cleaning Your Device
•
Keep the device clean and dry.
•
If the watch body or strap (including the airbag) is dirty, use a dry soft cloth to clean it. If the dirt
is di󰀩cult to remove, fully twist and dry a cloth dipped in clean water or 75% rubbing alcohol, and
then use it to wipe the area before wearing the device.