10
6. How do I connect a Wi-Fi device to my router using WPS?
When your router is powered on, touch its H button, and then
press the WPS button on the Wi-Fi device (such as a phone)
within two minutes to initiate standard WPS negotiation and
H button on it. Wait until the
indicator on the add-on router shows it is connected to the
network.
"HUAWEI router" refers to routers that support HarmonyOS
Mesh+. Please check if your device supports such feature.
7. How do I use the NFC function of the router to quickly
connect to the Wi-Fi network?
Unlock your phone, enable NFC on it, and touch the NFC
area on the back against the NFC area on the router, then
follow the onscreen instructions to connect the phone to the
Wi-Fi network.
This feature is available on Android devices that support NFC,
but some devices with non-standard NFC may be unable to
connect. iOS devices do not support connecting through NFC.
Safety information
Operation and safety
Do not use your device if using the device is prohibited. Do not
use the device if doing so causes danger or interference with other
electronic devices.
Pacemaker manufacturers recommend that a minimum distance of
15 cm be maintained between a device and a pacemaker to prevent
potential interference with the pacemaker. If using a pacemaker,
hold the device on the side opposite the pacemaker and do not
carry the device in your front pocket.
Avoid dusty, damp, or dirty environments. Avoid magnetic fields.
To Next Page
Loading...
Need help?
General
