XXXX The basic version Repair ManualV1.0 
            Huawei confidential, not to spread without permission 
 
 
 
 
 
 
 
This list is for reference only, subject to change without notice, please obtain the latest information from 
the relevant system Huawei company. If you have any questions, please contact the  local technical 
support. 
Transient suppression diode 2 
J902 6PIN ZIF connector 
Damage  caused  by  fault: 
TP function failure 
 
CON2 T card seat connector 
Damage caused by fault:: not 
read T card 
 
U101 BBIC 
Damage caused by fault:   
No boot, crash, RF breakdown 
U402 FLASH memory   
Damage caused by fault:   
No  boot,  no  download,  SW 
question 
 
J1101, J1102 SIM card seat 
Damage caused by fault:   
Not    read    SIM    card 
CON301 battery interface 
Damage caused by fault:   
No boot, no charging 
 
U301 power management chip 
Damage caused by fault:   
No boot, audio fault, not read SIM   
card  ,  not  read  T  card,  no 
download. etc 
 
 
U600 RF transceiver chip 
caused by fault: RF fault 
 
 
U1000 BT/WIFI/GPS/ FM    Chip 
caused  by  fault:: 
BT/WIFI/GPS/FM function fault 
J0003 BTB interface 
caused by fault:: rear 
CAM function fault 
 
J501 ear interface 
Damage   
caused  by  fault::  ear 
function fault 
CON 701 IO interface Micro 
Damage  caused  by  fault:::  no 
charging  ,Data  communication 
fault 
 
 
U1 RF power amplifier 
Damage caused by fault: launch failure 
U901 backlight chip 
Damage caused by fault:   
Screen backlight off 
J6401 ZIF interface 
Damage caused by fault:   
Lcd function fault 
J6401    Motion Chip 
Damage caused by fault:   
No effect of gravity 
J700 RF test seat 
Damage caused by fault:   
No  signal,  weak  signal,  no 
registration