Circuit analysis:
Y511- uses 3.5 standard hole headphones, a total of MIC headset, headphone left channel
Headphone Earphone, right, GND signal. Identify the headset is identified by the EAR_DET signal
Fault analysis and treatment process:
Earphone bad mainly refers to the headphones into the void, cannot recognize the earphone,
check on the earphone detecting signal EAR_DET is normal, can MIC headset headset
microphone circuit identification but have fault if available, pathway between HP_MIC-1,
HP_MP3L-1, see the EAR_DET and U301 is normal, headset MIC circuit device is damaged.
Detection Process:
Insert headphones
have no icon
Check whether the normal
operating current
Check the MIC headset line
device is weld break
Check EAR_det signal is normal
END
Check the earphone interface has
no weld damage
Replace the bad device or re
welding
To replace or re welding of U301
Y
Y
Y
Y
N
N
N
To Next Page
Loading...
