Huawei Y511-U030 - Chapter 4 PCBA Component Location Diagram

XXXX The basic version Repair ManualV1.0
internal public
2013-09-25
Huawei confidential, not to spread without permission
第 9 页，共 79 页
Chapter 4 PCBA Component Location
Diagram
Explain ：
1. All PCBA host will need to provide a positive and negative picture, need to
mark the main device on a PCBA board, tagging content includes: No., device
name, damage caused by fault phenomenon.
2. Image requirements to clear: for the device image annotation, users can
find the real position corresponding to the need to use "; the picture frame
drawing canvas".
3.The picture on the label and instructions corresponding to the characters
must be editable.