Need help?Do you have a question about the Hubsan H122D and is the answer not in the manual?
Instructions for binding the aircraft to the transmitter, including LED status indicators.
Procedure for performing horizontal calibration to correct aircraft drift during flight.
Instructions on how to arm the motors and take off using the transmitter.
Instructions on how to descend and disarm the motors after landing.
Binding procedure for the aircraft with the HS001 display and HT015 transmitter.
Detailed instructions for installing and removing propellers, including screw color coding.
Instructions for charging the 7.6v, 710mAh Li-Po battery and installing it into the aircraft.
Identifies key components of the H122D aircraft through diagrams.
Identifies key components of the HT015 transmitter through diagrams.
Identifies key components of the HS001 display through diagrams.
Identifies key components of the HV002 video goggles through diagrams.
Troubleshooting steps for when the aircraft and remote control fail to pair.
Solutions for issues related to video feed interference or no video display.
Steps to resolve problems with unstable aircraft or video feed.
Guidance on resolving issues preventing video or picture capture.
Important notices regarding safe operation and potential hazards, including propeller safety.
Warnings about unattended charging, disconnecting after charging, and suitability for children.
To Next Page
General
