Need help?Do you have a question about the Hubsan Zino 2+ and is the answer not in the manual?
General| Camera Sensor | 1/2.3 inch CMOS |
|---|---|
| Max Flight Time | 35 minutes |
| Gimbal | 3-axis |
| Battery Capacity | 3800 mAh |
| Weight | 929 g |
| Max Flight Speed | 20 m/s |
| Operating Temperature | -10°C to 40°C |
| Operating Frequency | 2.4 GHz |
| GNSS | GPS + GLONASS |
| Photo Resolution | 12 MP |
| Lens | FOV 80° |
| Aperture | f/2.2 |
| ISO Range | 100-3200 |
| Video Bitrate | 100 Mbps |
| Image Format | JPEG |
| Video Format | MP4 |
| Battery Voltage | 15.2 V |
| Battery Type | LiPo 4S |
| Charging Temperature | 5°C to 40°C |
| Remote Controller Operating Frequency | 2.4 GHz |
| Remote Controller Battery | 3350 mAh |
| Charger Input | 100-240V, 50/60Hz |
| Max Wind Resistance | Level 5 |
| Obstacle Avoidance | No |
| Follow Me Mode | Yes |
| Return to Home | Yes |
| Video Resolution | 4K: 3840x2160 @ 30fps |
| Dimensions | 326 x 260 x 94.9 mm |
| Transmitter Power (EIRP) | ≤20 dBm |
| Hovering Accuracy Range | Vertical: ±0.1 m, Horizontal: ±0.3 m |
| Supported File Systems | FAT32 |
| Controllable Range | -90° to 0° |
Be careful, avoid damaged components, and do not repair yourself.
Handle battery with care and be mindful of personal safety during flight.
Instructions for charging and installing the intelligent flight battery.
Explains Return to Home, Power, and flight mode selection.
Instructions on downloading and installing the required mobile application.
Steps to connect the aircraft with the remote controller and mobile device.
Detailed steps for the aircraft binding process via the APP.
Guide for compass calibration to ensure accurate navigation.
Explains GPS, Optical Flow, and Attitude flight modes.
Details RTH steps, One-key, Low Battery, and Failsafe modes.
To Next Page
