Hubsan Zino 2+ - 3.4.3 GPS Accuracy Test; 3.5 Motor Start;Stop

After entering the APP interface, tap on "Aircraft", select "GPS Accuracy Test" then
tap on "En able / Restart GPS Accuracy Test".
The aircraft will automatically proceed to test. If the GPS signal of the mobile phone
or the aircraft is poor that may cause the GPS accuracy test to fail.
3.4.3 GPS Accuracy Test
Motor starting condition
(1) The aircraft, remote control and mobile phone have been connected;
(2) The aircraft has been calibrated by the compass (four Orientation lights are
always on);
3.5 Starting/Stopping the Motors
Return altitude setting
GPS Accuracy Test
The aircraft will rise to the set RTH altitude before
activate RTH
Current GPS Accuracy
5m
GPS Accuracy Test Timeout
Start GPS Accuracy Test
15
14
Aircraft