Huck 2025 Series - Eu Declaration of Conformity

2
2025 Series Tooling Alcoa Fastening Systems
EU Declaration of Conformity
Manufacturer:
Alcoa Fastening Systems, Commercial Products Division, 1 Corporate Drive, Kingston, NY,
12401, USA
Description of Machinery:
Model number 2025 fastener installation tools
Relevant provisions complied with:
Council Directive related to Machinery, (89/392/EEC), (91/368/EEC), (93/44/EEC),
(93/68/EEC)
Council Directive related to EMC/EMI, (89/336/EEC)
European Representative:
Rob Pattenden, Huck International, Ltd. Unit C Stafford Park 7, Telford Shropshire TF3 3BQ,
England, United Kingdom
Authorized Signature/date:
I, the undersigned, do hereby declare that the equipment specified above conforms to the
above Directive(s) and Standard(s).
Signature: ___________________________________
Full Name: Henk Rosier
Position: Engineering Manager
Installation Systems Division
Place: Kingston, New York, USA
Date: June, 2005
Sound Levels
Model: 2025
To calculate equivalent noise level for other quantities of
fasteners in an eight hour period, use the formula:
Leq = SEL + 10 log (n/28,800)
where n = number of fasteners in eight hours.
Vibration Levels
Model: 2025
For an eight hour work day, installing 1,500 typical Huck
fasteners will result in an equivalent weighted RMS
vibration level A(8) of:
.12 m/s
2
To calculate equivalent vibration level for other quantities of
fasteners in an eight hour period, use the formula:
Equivalent Vibration Level, A8 (m/s
2
) = (n/480) x .46
where n = number of fasteners in eight hours,
and .46(m/s
2
) = Aeq for 60 seconds.
Test data to support the above information is on file at Alcoa Fastening Systems, Commercial Products Division, Kingston
Operations, Kingston, NY
, USA. Vibration measurements are frequency weighted in accordance with ISO 8041 (1990).
SEL
dB (A)
Peak Value
dB (C)
Leq
dB (A)
84.8 110 72.0
Leq reflects the
equivalent noise
level result of
installing 1,500
typical Huck
fasteners for an
eight hour work
day.