Need help?Do you have a question about the Huck BOBTAIL and is the answer not in the manual?
Presents noise and vibration emission data according to relevant standards.
Fundamental safety practices for using Huck equipment, including training and inspection.
Specific safety measures for operating hydraulic tools, including pressure limits.
Essential safety checks, training recommendations, and connection procedures before operation.
Step-by-step guide for connecting the tool, hoses, and power cord to the Powerig unit.
Specifies recommended pull and return pressure settings for different fastener sizes.
Detailed, step-by-step instructions for installing Bobtail fasteners using the tool.
Instructions for replacing wear parts like O-rings and inspecting cylinder bore.
Daily cleaning procedures for the nose assembly, including jaw maintenance.
Exploded view with part numbers and labels for the tool's head and handle assembly.
Diagram illustrating the assembly of hydraulic hoses, cord, and associated fittings.
To Next Page
General
