Huck 2600 - Page 3

Huck Model Series 2400, 2500 and 2600 (families) Sound Level
SEL = 75.8 dB (A)
peak value = 108.2 dB (C)
For an eight hour work day, installing 3000 typical Huck fasteners will result in an
equivalent noise level (Leq) of 66 dB (A).
To calculate equivalent noise level for other quantities of fasteners in an eight hour
period, use the formula:
Leq = SEL + 10 log (n/28,800)
where n = number of fasteners in eight hours
Huck Model Series 2400, 2500 and 2600 (families) Vibration Level
For an eight hour work day, installing 3000 typical Huck fasteners will result in an
equivalent weighted RMS vibration level (Aeq) of 12.50m/s
2
.
To calculate the equivalent vibration level for other quantities of fasteners in an eight
hour period, use the formula:
Equivalent Vibration Level, Aeq (m/s
2
) = (n/480) x 2.00
where n = number of fasteners in eight hours, and 2.00(m/s
2
) = Aeq for 60 seconds
Test data to support the above information is on file at Huck International, Inc., Kingston, NY, USA. Vibration
measurements are frequency weighted in accordance with ISO 8041 (1990).