DESCRIPTION
Model 2600 Hydraulic Installation Tool (HIT) with appropriate nose
assembly installs a wide range of Huck blind fasteners and HUCKBOLT®
Fasteners. This lightweight and compact mini tool is particularly adapted to
installing fasteners in limited clearance areas. Each tool is complete with
hydraulic hoses and couplings; electric switch and cord. The tool is
basically a cylinder and piston assembly. An unloading valve, designed to
relieve hydraulic pressure at end of the PULL stroke, is positioned by the
piston. End of piston rod is threaded and retaining nut and stop are
included for attaching nose assemblies.
Huck Hydraulic Installation Tools are designed to be powered by Huck
POWERIG® Hydraulic Units. The 2600 is designed to operate at
maximum of 5,700 psi (39,000 kPa) PULL and 2,800 psi (19,300 kPa)
RETURN pressures as supplied by Huck POWERIG Hydraulic Unit
Models 913, 918, 918-5, 940, 943, or equivalent.
A specific nose assembly is required for each fastener type and size. Nose
assemblies must be ordered separately - - see your Huck representative.
Table 1 - Specifications (1)
Length 9.40 in. (239 mm)
Width 2.65 in. (67 mm)
Height (incl. handle) 6.93 in. (176 mm)
Weight 7.30 lbs. (3.3 kg)
PULL pressure 5700 psi (39,300 kPa)
RETURN pressure 2800 psi (19,300 kPa)
Min. effective stroke 1.22 in. (31.0 mm)
(1) Length and weight does not include hoses/cord or nose assembly.
PulI capacity at 5700:13,840 lbs. (61.4 kN).
Power Source: Huck POWERIG Hydraulic Unit.
Hydraulic Fluid: Automatic transmission fluid. DEXRON II, or
equivalent.
1
To Next Page
Loading...