17
Fully Assembled View
Operating Your Grill
CAUTION
Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of
unauthorized parts
can create an unsafe condition and environment.
Use only the pressure regulator and hose assembly supplied with the outdoor cooking gas appliance must be
used. The regulator
of the appliance shall comply with the relevant EN standard. Replacement pressure
regulators and hose assembly must be those
specified by the outdoor cooking gas appliance manufacturer. Use
LP or butane cylinders equipped with a cylinder
connection device compatible with the connection for outdoor
cooking appliances. The cylinder must include a collar to protect
the cylinder valve. Do not drop or handle the
cylinder roughly. If the appliance is not in use, disconnect the cylinder. Turn off the
cylinder first if you need
change it.
Storage of the appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the
appliance. Store
cylinder outdoors and out of the reach of children. Do not store the cylinder in a building,
garage or other enclosed areas. Never
store your cylinder where temperatures can reach over 51.6℃/124.8°F.
Before connecting, make sure there is no debris caught in the head of the gas cylinder, regulator valve or in the
head of the
burner and burner ports. Connect regulator valve and hand tighten firmly. Disconnect the gas
cylinder from the regulator valve
when the grill is not in use. DO NOT obstruct the flow of combustion air or
ventilation air to the grill. Arrange the propane or
butane cylinder for vapor withdrawal and equipped with a listed
overfill prevention device (OPD).
This Appliance must be kept away from flammable materials during use. Do not contact with the surface when
the support
temperature exceeds 50 K.
To Next Page
Loading...