Huffy 6V - Front Wheels Installation

9
Installing the Front Wheels
Assembly
Spanner
Front axle
16
17
15
11
18
15
1. Slide Washer (15) onto the Front Axle.
2. Slide the Bushing (18) into the indent in the back of the Wheel (11) (it will sit even
with the back of the wheel).
3. Slide the Wheel onto the Front Axle. Ensure Bushing stays in place in Wheel.
4. Slide Washer (15) onto the Front Axle.
5. Install Locknut (16) securely on the end of the Front Axle with Spanner Wrench.
6. Align the two tabs of the Hubcap (17) with the slots of the wheel cover, and press
the Hubcap fi rmly into place.
Repeat the above steps for the other front wheel.
Installation