Need help?Do you have a question about the Hughes & Kettner ATTAX and is the answer not in the manual?
General| Brand | Hughes & Kettner |
|---|---|
| Model | ATTAX |
| Category | Musical Instrument Amplifier |
| Language | English |
Describes the three channels: Clean, Crunch, Lead, covering different tonal characteristics.
Details the two separate effects loops: a standard Mono FX LOOP and a Stereo LOOP.
Explains stereo configurations and the integration of stereo effects processors.
Covers frequency-corrected outputs for recording, simulating a miked cabinet sound.
Highlights the MIDI option for seamless control of channels and effects loops via messages.
Details the solid-state CLEAN channel's innovative circuitry for warm, hi-fi clean tones.
Describes the ATTAX CRUNCH tube channel's tonal spectrum from clean to overdrive.
Explains the LEAD channel's extreme gain reserves for modern lead playing and heavy chords.
Explains how to switch between the CLEAN, CRUNCH, and LEAD channels using switches and LEDs.
Describes the 1/4" instrument input jack and the MIDI LEARN button for saving settings.
Covers the CLEAN volume, GREEN CLEAN LED indicator, and the EQ section.
Explains the CLEAN/TUBE selector switch and the CRUNCH GAIN pot for input sensitivity.
Describes the YELLOW CRUNCH LED and RED LEAD LED indicators.
Explains the active/passive circuits for tone control in the CRUNCH and LEAD channels.
Details CRUNCHMASTER and LEADMASTER for balancing channel volumes.
Explains the STEREO MASTER VOLUME and FX-MIX controls for overall output and blend.
Describes the headphone jack output and the AC mains power switch.
Describes the mains power socket and the fuse holder for safety.
Explains the frequency-corrected stereo signal output jacks for recording.
Describes the serial signal path for external effects processors via LOOP RETURN.
Details the parallel STEREO EFFECTS LOOP with SEND/RETURN jacks and FX MIX control.
Explains the LINE OUT jacks for feeding the preamp's signal to power amps.
Explains the STAGEBOARD jack, its role in channel switching, and LED indicators.
Explains how the STAGEBOARD can be used to activate/deactivate the STEREO EFFECTS LOOP.
Provides technical specifications for the ATTAX, including circuitry, channels, jacks, and dimensions.
Provides example settings for a 'Top Forty' sound with single-coil pickups.
Offers example settings for a vintage sound with single-coil pickups.
Gives example settings for a heavy sound with humbucker pickups.
Provides example settings for a fusion sound with humbucker pickups.
Covers general warnings about placement, power source, ventilation, and basic handling.
Details conditions requiring unplugging, servicing, and safety for fuse replacement.
To Next Page