Need help?Do you have a question about the Hughes & Kettner CLUB REVERB and is the answer not in the manual?
General| Speaker | 1x12" Celestion |
|---|---|
| Channels | 2 |
| Reverb | Yes |
| EQ | 3-Band EQ (Bass, Mid, Treble) |
| Effects Loop | Yes |
| Footswitch | Yes |
Ensure proper ventilation, stable placement, and avoid extreme conditions for safe operation and amp longevity.
Details the functions and connections of the amplifier's front panel controls and inputs.
Instructions on how to switch between the CLEAN and LEAD channels using the amp's controls or a footswitch.
Guidance on connecting external effects processors via the serial effects loop for sound modification.
Information on routing the amplifier's signal to a mixing console, potentially via a RED BOX PRO.
Steps to diagnose and resolve issues when the amplifier fails to power on.
Troubleshooting steps for when the amplifier is powered but no audio output is produced.
Diagnosing problems with the footswitch not correctly changing amplifier channels.
Solutions for hum or interference issues encountered when using the LINE OUT/LINE IN jacks.
Troubleshooting distorted audio when connecting an FX processor to the LINE OUT.
Addressing low audio levels when using an FX processor with the LINE OUT connection.
To Next Page