Need help?Do you have a question about the Hughes & Kettner Matrix 100 Combo and is the answer not in the manual?
General| Type | Guitar Combo Amplifier |
|---|---|
| Technology | Solid State |
| Power Output | 100 Watts |
| Speaker Configuration | 1 x 12" |
| Effects Loop | Yes |
| Effects | Reverb, Chorus, Flanger, Delay |
| EQ | 3-band EQ |
| Inputs | 1x Instrument Input |
| Outputs | Line Out, Headphone Out |
| Footswitch | Optional |
Selects channels (1-4) and adjusts effect parameters using dedicated knobs.
Connects guitar input and adjusts channel/master volume levels.
Controls power on/off and connects the mains power cable.
Connects external speaker cabinets to the amplifier.
Connects stereo headphones for private listening, deactivating the internal speaker.
Outputs the amp's signal to external power amps or DI boxes.
Allows patching in external line signals like CD players for playback.
Connects external effect devices to the amp's serial effects loop.
Connects a footswitch for channel selection and effect control, including FX ON/OFF.
Provides a clean tone suitable for various pickups, with dedicated volume and voicing controls.
Offers versatile overdrive sounds from light grit to warm sustain, with gain and volume controls.
Delivers hard-hitting British rock tones with gain and volume controls.
Features fierce high-gain sounds for NuMetal, post-grunge, and aggressive styles.
Shared EQ controls for Crunch, Lead, and Warp channels, offering flexible tone shaping.
Offers Chorus, Flanger, and Tremolo effects, controlled via a single knob for rate and depth.
Provides adjustable delay times (80-1400ms) and feedback control for various echo effects.
Emulates classic spring reverb, with volume control for the effect level.
Details primary/secondary fuses, power consumption, and minimum impedance specifications.
Lists jack types, impedances, and sensitivity levels for input connections.
Details jack types, impedances, and output levels for various output connections.
To Next Page
