Need help?Do you have a question about the Hughes & Kettner SwitchBlade Head 100 and is the answer not in the manual?
General| Type | Guitar Amplifier Head |
|---|---|
| Power | 100 Watts |
| Channels | 4 |
| Tubes | Yes |
| Preamp Tubes | 3 x 12AX7 |
| Power Tubes | 4 x EL34 |
| Effects | Yes |
| Effects Loop | Yes |
| MIDI | Yes |
| Footswitch | Included |
Safety precautions and steps for powering on the amplifier.
Instructions for guitar input, speaker output, and mains connection.
Diagrams and instructions for connecting MIDI and FS 2 footswitch.
Overview of amp handling, knob functions, and preset logic.
Description of the Clean Channel's tone and controls.
Details Clean, Crunch, Lead, Ultra channels and their controls.
Explains the operation and parameters of the digital effects.
Covers MASTER VOLUME, STORE button, ORIGINAL VALUE LED, and FX LOOP.
Details FS-2 footswitch integration for effects and channel selection.
Details FX LOOP usage and MIDI IN/THRU connections.
Procedures for factory reset and saving presets via MIDI or direct methods.
Details default MIDI settings and factory presets.
Identifying signs of tube wear and when tubes need replacement.
Guidelines for tube replacement and tips for prolonging tube life.
Addresses mains connection problems and voltage selection.
Detailed specifications for all amplifier input types.
Detailed specifications for all amplifier output types.
Specifications for power consumption, voltage, and physical dimensions.
To Next Page