Need help?Do you have a question about the Hughes & Kettner SwitchBlade series and is the answer not in the manual?
Details the Crunch channel's tonal characteristics and gain control.
Describes the Lead channel's high-gain tone and compression.
Explains the Ultra channel's sound, low-end, and performance.
Explains input sensitivity, saturation, and the boost function.
Details the voicing section and frequency shaping.
Describes overtone content adjustment.
Explains balancing channel volumes and storing sounds.
Details the spring reverb emulation.
Explains delay parameters: Volume, Time, Feedback.
Covers Chorus, Flanger, and Tremolo effects.
Controls the power amp output volume.
Describes the switchable parallel/serial effects loop.
Controls internal and external effects via footswitch.
Describes footswitch connectivity for channel switching.
Details the FSM 432 MIDI footswitch controller.
Explains how to save presets via MIDI or device.
Guidelines for tube replacement, for qualified technicians.
Tips for extending the lifespan of amplifier tubes.
General| Channels | 4 |
|---|---|
| MIDI | Yes |
| Footswitchable | Yes |
| Power Output | 100W |
| Effects | Reverb, Delay |
| Footswitch | Yes |
To Next Page