Need help?Do you have a question about the Hughes & Kettner Montana Acoustic Guitar Amplifier and is the answer not in the manual?
General| Brand | Hughes & Kettner |
|---|---|
| Model | Montana Acoustic Guitar Amplifier |
| Category | Musical Instrument Amplifier |
| Language | English |
Details input sensitivity, impedance, and FX loop parameters for the amplifier's preamp section.
Specifications for power output, frequency response, speaker configuration, and headphone capabilities.
Information regarding mains voltage, maximum power consumption, fuse type, physical dimensions, and weight.
Describes instrument inputs (Warm, Bright) and primary tone shaping controls (Volume, Contour).
Explains the serial and parallel effects loop connections (Send, Return) and the FX Mix control.
Details the Bass, Mid Freq, Mid Level, Treble, Microphone Volume, and Reverb controls.
Covers the Master Volume control and the parallel effects loop functionality.
Details the Parallel FX Loop Send/Return jacks and the Headphones output jack.
Describes the Mains Switch, Mains Socket, and the XLR Microphone Input.
Explains the Balanced XLR DI OUT for connecting to mixers or other amplifiers.
Guidelines for connecting external effects devices to the serial and parallel FX loops.
Instructions on using the Balanced DI OUT to connect the Montana to a mixer.
Addresses issues related to the amplifier not powering up, checking mains cable and fuse.
Troubleshoots issues where no sound is audible despite proper connection.
Diagnoses and resolves issues of distorted signal when using effects devices in the serial FX loop.
Addresses issues where the output signal is significantly softer with effects in the serial FX loop.
To Next Page