Hughes HX System User Manual

Chapter 3 • Network management
34
1037852-0001 Revision A
Component control
NMSS can send commands to network components using SNMP
for actions such as resets, reboots, and forced reloads of software
configuration.
HX gateway control
You can send commands to the following HX gateway
components:
• IP gateway (IPGW) / satellite gateway (SATGW)
• MFS (resides on the NMSS server)
• DNCC
• CP
• CDS
Remote site control
You can send commands to the satellite routers at remote sites.

Hughes HX System Specifications

General

Brand	Hughes
Model	HX System
Category	Receiver
Language	English