Hultafors HDL 80 User Manual

12. Manufacturer‘s Guarantee 13. EC conformity declaration
Declaration of Conformity
We Hultafors Group AB, Hultaforsvägen 21, Hultafors
declare under our sole responsibility that the Product(s)
HDL 80
to which this declarations relates is in conformity with the following standards.
HDL 80:
• EN 55022: 2010
• EN 61000
• EN 55024: 2010
• EN 60825-1:2007
Following the provisions of Directive(s)
Electromagnetic compatibility 2004 / 108 / EC
Low Voltage Directive 2006 / 95 / EC
„e manufacturer warrants to the original
purchaser who is stated on the guarantee
card, the freedom from defects for the device
for a period of two years, with the exception
of batteries, as of the point in time the device
is handed over. e guarantee is limited to
repairs and / or replacements at manufacturer‘s
discretion. Defects which are caused through
improper handling by the purchaser or third
parties, natural wear and optical flaws that
do not aect the usability of the equipment,
are not covered by this guarantee. Claims
under this guarantee can only be invoked if the
device is submitted along with the guarantee
card, completely filled out by the dealer, dated
and provided with the company stamp. If the
guarantee claim is justified, the manufacturer
shall bear the transport costs. e duration
of the guarantee will not be extended through
repair or spare parts work which is carried out
within the scope of the guarantee.
Further claims are excluded, unless there are
provided by the respective national legislation. In
particular the manufacturer shall not be liable for
any direct, indirect, incidental or consequential
damages, losses
or expenses in connection with
the use or because of the inability to use the tool
for any purpose whatsoever. Implied warranties for
the usage or suitability for a particular purpose are
expressly excluded.“
22 23

Hultafors HDL 80 Specifications

General

Brand	Hultafors
Model	HDL 80
Category	Measuring Instruments
Language	English