Hultafors HDL 80 User Manual

4. Safety instructions
3.2 Functions
• Individual measurement
• Min/Max measurement
• Continuous measurement
• Area measurement
• Volume measurement
• Indirect 2-point measurement
• Indirect 3-point measurement
• Addition
• Subtraction
• Measured value memory
• Unit of measurement
• 4-line display with backlighting
4.1 Area of responsibility
4.1.1 MANUFACTURER
Hultafors is responsible for the safe delivery
condition of the product, including the operating
manual and the original accessories.
4.1.2 OPERATOR
e operator is responsible for using the product
as intended, the deployment of his personnel,
their training and the operational safety of the
product.
• He understands the safety
information which is stated on the
product and the instructions which
are contained in the operating
manual.
• He shall comply with local regulations relating
to safety and accident prevention regulations as
well as worker protection laws and regulations.
• He shall immediately notify Hultafors if safety-
related issues should develop on the product
or during its utilization.
• He shall ensure that the product is not utilized
any further if defects become evident, and he
will have the product repaired professionally.
4.2 IMPROPER USE
• Use of the device and the accessories without
instruction.
• Use of third-party accessories or additional
equipment.
• Use outside of the intended limits
(see Chapter
3 / Tech ni c al dat a)
.
• Use under extreme temperature fluctuations
without an adequate acclimatization.
• Disabling of safety devices and removal of
hazard notices and labels.
• Unauthorized opening of the device.
• Performance of modifications or alterations
the device or the accessories.
• Deliberate blinding of third parties.
• Inadequate safeguarding at the installation
site.
4.3 UTILIZATION LIMITATIONS
e HDL 80 is suitable for a continuous use in an
atmosphere which can be inhabited by humans.
• Do not operate the product in explosion-prone
or corrosive environments.
• Inform the local safety authorities and
safety experts before working in hazardous
environments, in close proximity to electrical
installations or similar surroundings.
8 9

Hultafors HDL 80 Specifications

General

Brand	Hultafors
Model	HDL 80
Category	Measuring Instruments
Language	English