EasyManuals Logo
Home>Hultafors>Measuring Instruments>HDL 80

Hultafors HDL 80 User Manual

Hultafors HDL 80
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
5. La ser safet y / classific ation
e HDL 80 emits a visible laser point.
e product corresponds to the Laser Class 2
according to DIN EN 60825-1:2007
Laser Class 2:
When using Class 2 laser devices the eye is
protected by the eyelid closure reflex or evasive
reactions in case of a random and short-term
exposure.
WARNING
Looking directly into the beam with
optical aids (e.g. binoculars, telescopes)
can be dangerous.
CAUTION
Looking into the laser beam may be
hazardous to the eye.
Do not look into the laser beam.
Do not aim the laser beam at other people.
Labeling on the device:
Do not remove the type plate!
6. Getting Started
6.2 Belt bag
e laser instrument can be stowed in a belt
pouch for transport. It must be removed from
the pouch when taking measurements.
6.1 Batteries
1. Open the battery compartment cover on the
back of the instrument using a screwdriver.
2. Insert the batteries into the instrument,
observing the correct poles.
3. Close the battery compartment cover
(tighten the screw by hand using a
screwdriver).
Use only AAA batteries (1.5 V).
Remove the batteries if the instrument is
not used over a longer period of time.
12 13

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hultafors HDL 80 and is the answer not in the manual?

Hultafors HDL 80 Specifications

General IconGeneral
BrandHultafors
ModelHDL 80
CategoryMeasuring Instruments
LanguageEnglish