Need help?Do you have a question about the HULTDINS SuperSaw 555S and is the answer not in the manual?
Covers essential safety guidelines for operators before using the equipment.
Explains hazard levels indicated by Danger, Warning, and Caution symbols.
Details safe operating practices, including checks and area clearance.
Highlights the risk of ejected chain parts and necessary precautions.
Focuses on protecting personnel from saw hazards.
Outlines critical safety steps for performing maintenance and repairs.
Identifies and illustrates the primary components of the SuperSaw 555S grapple saw.
Locates and names the adjustment valves for the grapple saw's functions.
Shows the three hydraulic connection ports on the grapple saw unit.
Details the key components that make up the SuperCut saw unit.
Provides dimensions, hydraulic system, and chain lubrication specifications.
Lists dimensions and specifications for the standard rotator bracket.
Provides dimensions and specifications for the HD rotator bracket.
Lists and describes the special tools needed for servicing the SuperSaw 555S.
Explains the M06 pump mechanism and oil delivery to the saw bar.
Gives guidance on optimal placement for weight balance and performance.
Details steps and torque for mounting the rotator bracket.
Guides on connecting hydraulic lines for saw motor and grapple.
Provides steps for mounting the grapple saw onto the SuperGrip TL.
Instructions for filling saw motor casing with oil before starting.
Step-by-step guide to adjusting feed out pressure with a gauge.
Details adjusting retraction speed via air pressure in the air-tank.
Instructions for setting chain tension pressure using the regulating valve.
Step-by-step guide for safely removing and installing a new saw chain.
Instructions on how to safely remove and install a new saw bar.
Details the method for replacing the bar holder on the saw unit.
Instructions for replacing the drive sprocket and related components.
Covers general maintenance requirements and safety precautions.
Lists essential checks to be performed daily for unit condition.
Provides guidance on lubricating the saw unit, including grease type and points.
To Next Page
General
