READY
GET
1. Remove all packaging materials
from the chair, then plug the power
cord into a 110-volt wall outlet.
2. Power on
Turn the master power switch to On (located on the
bottom center of the chair back).
Unpack the box
Head Pillow
Chair
3. Raise the backrest
Use the remote control to raise the backrest
to an upright position.
4. Install the head pillow
Attach the head pillow to the top of the backrest
using the hook and loop fasteners.
Your HT
™
-270
requires some simple assembly
(no tools required). Simply plug
it in, turn it on, install the head
pillow, and you’re set to go!
7
To Next Page
Loading...
